O-Ring Cord Ø1.5 mm, NBR 70 ° Black

Are you looking for a reliable seal for your next project? Our O-ring cord in nitrile rubber (NBR) with a diameter of 1.5mm is the perfect solution. With a hardness of 70 ° Shore, this string is both flexible and durable. Sold per meter, so you can buy exactly the length you need.

Important properties

• Material: Nitril rubber (NBR)
• Diameter: 1.5mm
• Hardness: 70 ° Shore
• Length: Sold per meter

Uses

• Hydraulic systems
• Pneumatic system
• Oil and fuel seals
• Heat sources and cooling systems

Advantages

• Chemical resistance: Perfect for use with hydraulic oils, vegetable oils, and more.
• Temperature -resistant: Works in a wide temperature range.
• High friction: Ideal for applications that require good friction.
• Wear -resistant: Also holds at high temperatures.
• Dynamic Properties: Suitable for varying use.
• Oil- and acid resistant: Another advantage of NBR material.
• Antistatic properties: Available in black nitrile rubber with kim smoke.

Mounting and installation

To ensure the correct and efficient mounting of your O-ring string, we recommend that you follow these steps:

1. Prepare the workspace: Before you start, make sure the workspace is clean and organized. Have all the necessary tools and materials at hand.

2. Clean up stand surface: Use a suitable cleaning solution to remove any oil, dirt or other contaminants from the surface where the O-ring string is to be mounted.

3. Measure and mark: Use a tape measure or ruler to measure and mark the exact length of the O-ring string needed for your application.

4. Cut to length: Use a sharp scissors or knife to cut the cord to the marked length. Make sure the clip is as straightforward as possible to avoid any leaks.

5. Apply glue or seal: If your application requires it, apply a small amount of glue or seal to the ends of the cord to ensure a tight seal.

6. Attach the string: Place the O-ring string on the prepared surface and use clamps or other fasteners to secure it in place.

7. Check the installation: After mounting, do a visual inspection to ensure that the string is correctly installed and that there are no signs of incorrect assembly that can lead to leakage or other problems.

8. Test the feature: If possible, perform a function test to ensure that the O-ring string works properly in the specific application.